Bosch Appliances manual En Connect the cables E2600 DSA E-Series iSCSI Disk Arrays

12 en Connect the cables E2600 DSA E-Series iSCSI Disk Arrays

CONTR OLLER A

Exp

CONTR OLLER B

Exp

SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B
SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B
SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B

SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B
SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B
SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B
SAS IN SAS IN		SAS EXP	SAS IN SAS IN		SAS EXP
	ESM A			ESM B

Steps to connect Ethernet cables for out-of-band management only

1.Connect one end of the Ethernet cable to the Ethernet port 1 connector on controller A.

2.Connect the other end of the Ethernet cable to the appropriate Ethernet network connection or directly to your Ethernet ports on your management station.

3.Repeat step 1 through step 2 for controller B.

07/2012 V1 Quick Install Guide Bosch Sicherheitssysteme GmbH