Security Systems
From
STVC/PRM
Product Management
Telephone
+49 911 93456 0
Nuremberg
24.01.2013
5.5Changes with FW 5.50.0059
•DHCP is enabled by default with new devices to achieve ONVIF Plug&Play compatibility. Settings remain untouched during firmware upgrade.
•NTCIP support is now a licensable option for dome cameras.
•Class D IP addresses are denied for standard address fields in Web browser.
•Unused
•RTSP multicast connections need a retrigger to keep alive, initiated by the CGI parameter "mcRetrigger", which is set by default.
It can be disabled by setting mcRetrigger=0 in the RTSP URL for environments where no
5.6New Features with FW 5.50.0059
Encoder
•Predictable rate control for long term recording ensures that maximum bit rate is not exceeded by peaks due to high motion. This makes storage calculation more reliable.
•Downscaled images from HD cameras can use resolutions with undistorted 16:9 aspect ratio.
•JPEGs are also possible with downscaled resolutions.
•Adaptive Bit Rate encoding is available in TCP mode for replay and live. This is activated as long as there is only a single client connected to the stream. With the second connection, the profile settings become active.
•Quality settings (QP settings) are harmonized over all products.
Network
•IPv6 support for Web browser access to product pages, including live view, control and replay, has been introduced.
•Quality of Service (QoS) allows setting different priorities for video, audio and control connections.
•IP Filtering allows defining two IP address ranges allowed to communicate with a device.
•Flexible path for FTP can be defined, using a
•HTTPS encryption using AES and 3DES ensures compatibility with latest Web browser generations like IE9.
•SNMP community names can be defined.
•HTTP streaming (server push) allows mobile clients to access video.
•MTU can be configured to adapt to network conditions.
9
BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany
