Troubleshooting

This chapter gives helpful information for what to do if you encounter an error.

This chapter includes:

Redistributing toner

Clearing original document jams

Tips for avoiding paper curls

Tips for avoiding paper jams

Clearing paper jams

Understanding display messages

Solving other problems

Redistributing toner

When the toner cartridge is near the end of its life:

White streaks or light printing occurs.

Prepare new cartridge appears on the display.

The Status LED blinks red.

If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner.

1.Open the front door.

2.Pull the toner cartridge out.

3.Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge.

If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

4.Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine.

Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the

Troubleshooting_ 53

Page 54
Image 54
Muratec F-116 manual Troubleshooting, Redistributing toner