Installation / Moving, Maintenance / Checking | Muratec F-116

Installation / Moving

Warning

Do not place the machine in an area with dust, humidity or water leaks.

► This could result in electric shock or fire.

Caution

When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people.

►The machine could fall, causing human injury or machine damage.

Do not place the machine on an unstable surface.

►The machine could fall, causing human injury or machine damage.

The machine should be connected to

the power level which is specified on the label.

►If you are unsure and want to check the power level you are using, contact the electrical utility company.

Use only No.26 AWGa or larger, telephone line cord, if necessary.

►Otherwise, it can cause damage to the machine.

a.AWG: American Wire Gauge

Do not put a cover over the machine or place it in an airtight location, such as a closet.

►If the machine is not well-ventilated, this could result in fire.

Make sure you plug the power cord into a grounded electrical outlet.

►Otherwise, this could result in electric shock or fire.

Do not overload wall outlets and extension cords.

►This can diminish performance, and could result in electric shock or fire.

Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (79”) with a 140V machine, then the gauge should be 16 AWG or larger.

►Otherwise, it can cause damage to the machine, and could result in electric shock or fire.

Maintenance / Checking

Caution

Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or achol; do not spray water directly into the machine.

►This could result in electric shock or fire.

When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine.

►You may get injured.

Keep cleaning supplies away from children.

►Children may get hurt.

Do not disassemble, repair or rebuild the machine by yourself.

►It can cause damage to the machine. Call a certified technician when the machine needs repair.

Safety information_ 7

Image 8

Muratec F-116 manual Installation / Moving, Maintenance / Checking

Contents

User Guide Copyright Copyright Contents Resolution Darkness Copying Cleaning the drum Checking display messages Safety information Important safety symbolsSafety information Operating environment Operating method Installation / Moving Maintenance / Checking Supply usage Laser Safety Statement Ozone SafetyRegulatory information Regulatory information Taiwan only RecyclingCorrect disposal of batteries in this product Radio Frequency Emissions Russia onlyGermany only Fax Branding FCC Information to the User You should also know that Ringer Equivalence NumberReplacing the Fitted Plug for UK Only Brown Live Important warningGreen and Yellow Earth China only About this user’s guide ConventionAbout this user’s guide Conventio Description Example Quick Install Guide Finding more informationMaterial Name Description Instructions in the guide to prepare the machine Features of your new product Features of your new productSpecial Features Introduction Machine overviewFront view Introduction Rear view Control panel overview Power LED Understanding the Status LEDIntroducing the useful button Turning on the machine Basic setup Basic setupSetting up the hardware Setting the date and time Changing the clock modeSetting sounds Changing the display language Entering characters using the number keypad Entering alphanumeric charactersKeypad letters and numbers Correcting numbers or names Using the save modes Setting the paper Media and tray Preparing originalsLoading originals Document feeder Selecting print media Guidelines to select the print media Media sizes supported in each mode Mode Size SourceCopy mode Fax mode Loading paper in the tray Tray Setting the paper size and type Using the output supportLetterhead/ Preprinted paper SINGLE-SIDED DOUBLE-SIDED Basic copy Changing the settings for each copyCopying To scale the copy by directly entering the scale rate Changing the default copy settingsSetting copy timeout Setting the fax header FaxingPreparing to fax Sending a fax Delaying a fax transmission Sending a fax manuallyConfirming a transmission Automatic redialing Adding documents to a reserved delay fax job Canceling a reserved delay fax jobSending a priority fax Sending a fax in toll save time Receiving manually in Tel mode Receiving automatically in Answering Machine/Fax modeReceiving faxes manually using an extension telephone Receiving a fax Receiving faxes using Drpd mode Receiving in secure receiving modeActivating secure receiving mode Deactivating secure receiving mode Adjusting the document settings Forwarding a fax to other destination Setting up address book Using group dial numbers Group dial numbersRegistering a group dial number Editing a group dial number Printing sent fax report automatically Machine status and advanced feature Fax setupChanging the fax setup options Available fax setup options Using the advanced fax settings Advanced fax setting options Copy setup Changing the copy setup optionsChange Default Printing a report Clear All Mem Menu overview Items Option Machine status and advanced feature Maintenance Cleaning a machineCleaning the outside Cleaning the inside Cleaning the scan unit Maintenance Cleaning the drum Storing the Toner cartridgeHandling instructions Use of non-Muratec and refilled toner cartridge Tips for moving & storing your machine Redistributing toner TroubleshootingTroubleshooting Clearing original document jams Input Misfeed Pressure lever Tips for avoiding paper curlsExit Misfeed Tips for avoiding paper jams Clearing paper jams Inside the machine Exit area If you do not see the jammed paper, go to next step Checking display messages Message Meaning Suggested SolutionsUnderstanding display messages Power Failure Operation NotAssigned Paper Jam Solving other problems Paper feeding problemsPrinting problems Printing quality problems Light or faded print Toner specksDropouts White Spots Toner smear DefectsBackground scatter Misformed Condition Skew Copying problems Condition Suggested Solution Fax problems Supplies and accessories How to purchaseAvailable maintenance parts Supplies and accessories End of life Replace new cart appears on the display Replacing the toner cartridgeParts Supplies and accessories Specifications Hardware specificationsEnvironmental specifications Electrical specifications TRAY1 Print media specificationsType Size Dimensions Glossary Default Dot Matrix PrinterDuplex Duty Cycle Ethernet EtherTalkFuser Unit Gateway ITU-T No chart MAC address Modem NetWareOriginals PostScript Subnet Mask PRN fileProtocol Watermark Toner CartridgeUNC Path Index Turning on the machine Index Time setting 23 toner cartridgeToner save mode 25 tray