7.Reconnect the support and the control panel and then close the control panel firmly until it clicks into place.

Cleaning the drum

If there are streaks or spots on your machine, the OPC drum of the cartridge may require cleaning.

1.Before setting the cleaning procedure, make sure that paper is loaded in the machine.

2.Press Menu until Maintenance appears.

3.Press the left/right arrow until Clean Drum appears and press OK.

4.Press the left/right arrow until On appears and press OK.

The machine prints a cleaning page. Toner particles on the drum surface are affixed to the paper.

5.If the problem remains, repeat step 1 through 4.

Storing the Toner cartridge

Toner cartridges contain components that are sensitive to light, temperature, and humidity. Muratec suggests users follow the recommendations to ensure the optimum performance, highest quality, and longest life from your new Muratec toner cartridge.

Store this cartridge in the same environment as the printer it will be used in; this should be in controlled office temperature and humidity conditions. The toner cartridge should remain in its original, unopened package until installation – If original packaging is not available, cover the top opening of the cartridge with paper and store in a dark cabinet.

Opening the cartridge package prior to use dramatically shortens its useful shelf and operating life. Do not store on the floor. If the toner cartridge is removed from the printer, always store the cartridge:

Inside the protective bag from the original package.

Store lying flat (not standing on end) with the same side facing up as if they were installed in the machine.

Do not store consumable in;

-Temperature greater than 40°C (104°F).

-Humidity range less than 20% nor greater than 80%.

-An environment with extreme changes in humidity or temperature.

-Direct sunlight or room light.

-Dusty places.

-A car for a long period of time.

-An environment where corrosive gases are present.

-An environment with salty air.

Handling instructions

Do not touch the surface of the photosensitive drum in the cartridge.

Do not expose the cartridge to unnecessary vibrations or shock.

Never manually rotate the drum, especially in the reverse direction; this can cause internal damage and toner spillage.

Use of non-Muratec and refilled toner cartridge

Muratec does not recommend or approve the use of non-Muratec brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges.

Muratec's warranty does not cover damage to the machine caused by the use of a refilled, remanufactured, or non-Muratec brand toner cartridge.

Estimated cartridge life

Estimated cartridge life (the life of the toner cartridge yield) depends on the amount of toner that print jobs require. The actual print-out number may vary depending on the print density of the pages you print on, operating environment, printing interval, media type, and/or media size. For example, if you print a lot of graphics, the consumption of the toner is high and you may need to change the cartridge more often.

Maintenance_ 51

Page 52
Image 52
Muratec F-116 manual Storing the Toner cartridge, Cleaning the drum, Handling instructions, Estimated cartridge life