Muratec F-116 Understanding the Status LED, Introducing the useful button, Turning on the machine

Understanding the Status LED

The color of the status LED indicates the machine's current status.

STATUS		DESCRIPTION
Off	•	The machine is off-line.
	•	The machine is in power saver mode. When data is received, or any button is pressed,
		it switches to on-line automatically.

Green:			Blinking	When the backlight blinks rapidly, the machine is printing data.
Online
			On	The machine is on-line and can be used.
(		)
Red:			Blinking	• A minor error has occurred and the machine is waiting for the error to be cleared. Check
Error				the display message. When the problem is cleared, the machine resumes.
(	)			• Small amount of toner is left in the cartridge. The estimated cartridge lifea of toner is
				close. Prepare a new cartridge for replacement. You may temporarily increase the
				printing quality by redistributing the toner (See "Redistributing toner" on page53).
			On	• A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to
				replace the toner cartridge (See "Replacing the toner cartridge" on page68).

•A paper jam has occurred (See "Clearing paper jams" on page56).

•The cover is opened. Close the cover.

•There is no paper in the tray. Load paper in the tray.

•The machine has stopped due to a major error. Check the display message (See "Understanding display messages" on page59).

a.Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when End of life Replace new cart appears and the printer stops printing

Muratec does not recommend using non-genuine Muratec toner cartridges such as refilled or remanufactured. Muratec cannot guarantee non-genuine Muratec toner cartridge's quality. Service or repair required as a result of using non-genuine Muratec toner cartridges will not be covered under the machine warranty.

Check the message on the display. Follow the instructions in the message or refer to troubleshooting part (See "Understanding display messages" on page59). If the problem persists, call for service.

Power LED

The power LED indicates the machine's on or off.

STATUS		DESCRIPTION
Off	The machine is turned off.
On	•	The machine is in ready mode.
	•	The machine is in power on.

Introducing the useful button

Menu button

When you want to know the machine status and set your machine to use an advanced feature, click Menu button (See "Machine status and advanced feature" on page42).

Turning on the machine

1.Plug in the power cord.

2.Press (power) on the control panel.

If you want to turn the power off, press this button.

Introduction_ 21