135
General
Sound Feedback
Auto Power
Standby Control
Lamp Schedule
OSD Display
Power On Adjustment
Temperature Control
O
O
Auto
O
0 Sec
77
-The displayed image may differ depending on the model.
Sound Feedback
Your product gives sound feedback when you use product.
Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume.
This function is enabled by default. The volume can be adjusted or muted.
―Off / Low / Medium / High
Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
•Off / On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
―Available in PC / DVI mode.
•On
Power-saving mode will activate if no input signals are detected.
•Off
The message No Signal will appear if no input signals are detected.
―The Standby Control option is only enabled when Source is set to PC, DVI.
―If No Signal is displayed although a source device is connected, check the cable connection.