55
MDC Programmeme Installation/Uninstallation

Installation

1
Insert the installation CD into the CD-ROM drive.
2
Click the MDC Unified installation programme.
3
Select a language for installation. Next, click "OK".
4
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
5
In the "Licence Agreement" window displayed, select "I accept the terms in the licence agreement" and click "Next".
6
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
7
In the displayed "Destination Folder" window, select the directory path you want to install the programme in and click "Next".
8
In the displayed "Ready to Install the Programme" window, check the directory path to install the programme in and click "Install".
9
Installation progress will be displayed.
10
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
11
The MDC Unified shortcut icon will be created on the desktop after installation.

Uninstallation

1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Programme.
2
Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If a software installation window is not
displayed on the main screen, install with
the MDC Unified execution file in the
MDC folder on the CD.
If the directory path is not specified, the
programme will be installed in the default
directory path.
Select "Launch MDC Unified" and click
"Finish" to run the MDC programme
immediately.
-The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
-Press F5 if the execution icon is not
displayed.