Samsung MD40C, MD32C, MD55C user manual PIP On/Off control, Auto adjustment control PC and BNC only

PIP On/Off control

•• Function

The PIP mode of a product can be turned on or off using a PC. ――Only available on models that have the PIP function. ――The mode cannot be controlled if Video Wall is set to On. ――This function is not available in MagicInfo.

•• Viewing PIP on/off state (Get the PIP ON / OFF Status)

Header	Command	ID	Data length	Checksum
0xAA	0x3C		0

•• Setting PIP on/off (Set the PIP ON / OFF)

Header	Command	ID	Data length	Data	Checksum
0xAA	0x3C		1	"PIP"

"PIP": A code used to turn the PIP mode of a product on or off

1:PIP ON

0:PIP OFF

•• Ack

Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3C	"PIP"
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3C	"PIP"

"ERR": A code showing what error has occurred

Auto adjustment control (PC and BNC only)

•• Function

Automatically adjust the PC system screen using a PC.

•• Viewing auto adjustment state (Get Auto Adjustment Status) None

•• Setting auto adjustment (Set Auto Adjustment)

Header	Command	ID	Data length	Data	Checksum
0xAA	0x3D		1	"Auto
				Adjustment"

"Auto Adjustment" : 0x00 (at all times)

•• Ack

Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3D	"Auto
						Adjustment"
•• Nak
Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3D	"ERR"

"ERR": A code showing what error has occurred

38