ROUTINE MAINTENANCE

(4) Push down and close the laser unit cover.

5 Repeat step 4 to clean all holes in the laser unit (4 holes).

There are a total of 4 places to be cleaned in the laser unit, including the hole cleaned in step 4. Clean all holes.

Cover

6 Replace the cleaning tool.

(1) Rotate the cleaning tool after putting it on the boss and hook its edge (the side that does not have a handle) to the claw on the left side. Hook the cleaning tool with the clean side face up.

(2) Place the right-hand side of the cleaning tool on the inner side, spread across the top of the claw.

(3) Hook the cleaning tool to the claw.

7 Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.76), push the toner collection container into the machine.

81

Page 81
Image 81
Sharp MX-C300PL, MX-C300PE manual Repeat to clean all holes in the laser unit 4 holes, Replace the cleaning tool