Sharp MX-C300PL Date & Time Set, Daylight Saving Time, Confirmation of Network, Connection Type

SYSTEM SETTINGS

Change Admin PW

Use this function to change administrator password. To change the administrator password, see

"PROGRAMMING AN ADMINISTRATOR PASSWORD" (p.83).

Initial Setting

The default settings for operation of the machine can be configured. Select the [Initial Setting] to configure the settings.

Date & Time Set

Use this to set the date and time in the machine's built-in clock.

Daylight Saving Time

Enable daylight saving time.

Printer

Settings related to the printer function can be configured.

Select the [Printer] to configure the settings.

Notice Page

Set whether a notice page is printed when printing does not take place due to an error such as memory full.

Network

Network settings are described below.

Select the [Network] key to configure the settings.

Confirmation of Network

Confirm network settings.

Connection Type

You can change the machine's network connection type.

Wired Settings

IPv4 Settings

When using the machine on a TCP/IP (IPv4) network, use this setting to configure the IP address of the machine.

The settings are shown below.

Enable DHCP

Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol). When this setting is enabled, it is not necessary to manually enter an IP address.

IPv4 Address

Enter the IP address of the machine.

Subnetmask

Enter the Subnetmask.

Default Gateway

Enter the Default Gateway.

IPv6 Settings

When using the machine on a TCP/IP (IPv6) network, use this setting to configure the IP address of the machine.

The settings are shown below.

Enable IPv6 Protocol

Enable this setting.

Enable DHCPv6

Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol). When this setting is enabled, it is not necessary to manually enter an IP address.

Manual Address

Enter the IP address of the machine.

Prefix Length

Enter the prefix length (0 to 128).

Default Gateway

Enter the IP Gateway address.

•If DHCP is used, the IP address assigned Note to the machine may change automatically.

If the IP address changes, printing will not be possible.

•In an IPv6 environment, the machine can use LPD protocol.

88