Sharp MX-C300PL, MX-C300PE manual Misfeed in the Paper Tray

TROUBLESHOOTING

MISFEED IN THE PAPER TRAY 1

	Note Make sure that there is no misfed paper in the
	tray before pulling it out. (p.69)
1	Open the side cover and remove the
	misfed paper. (p.69)
2	Lift and pull out the upper paper tray
	and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

MISFEED IN THE PAPER TRAY 2 (Option)

1 Open the lower side cover.

Grasp the handle to open the lower side cover.

2 Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

3	Push the upper paper tray in
	completely.
	Push the tray in completely.
4	Open and close the side cover.
	The message " Clear paper path." will be
	cleared and printing will be possible.

(1)

(2)

• When closing the side cover, press on the Note handle.

•If the message does not clear, check again to make sure that no pieces of paper remain.

3	Close the lower side cover.
	The message " Clear paper path." will be
	cleared and printing will be possible.
4	If the misfed paper is not seen in step 2,
	lift and pull out the lower paper tray

and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

5 Close the lower paper tray.

Push the tray in completely.

Note If the message does not clear, check again to make sure that no pieces of paper remain.

73