Sharp MX-C300PL, MX-C300PE manual Part Names and Functions

1

BEFORE USING THE MACHINE

This chapter contains basic information that should be read before using the machine.

PART NAMES AND FUNCTIONS

(14)

(15)

	(7)
(1)	(8)
(2)		(10)
(3)	(9)	(11)
(4)		(12)	(16)
(3)		(13)	(3)
(5)
(6)

(1)Power switch

Press to turn the machine power on and off.

(2)Output tray extension

When you eject the paper of A4 size or larger, you can open to the outside.

(3)Handles

Use to move the machine. When attaching tray 2, use the handle at the bottom.

The main unit is extremely heavy, and thus two Note people are required to do the work. When lifting

the main unit, grasp the handles on each side firm.

(4)Output tray

Printed pages are output to this tray.

(5)Tray 1

Tray 1 can hold approximately 250 sheets of paper (80 g/m2 (21 lbs.)). For restrictions on paper types, sizes, and weights, refer to "USEABLE PAPER"

(p.13).

(6)Tray 2 (Option)

Tray 2 can hold approximately 500 sheets of paper (80 g/m2 (21 lbs.)). For restrictions on paper types, sizes, and weights, refer to "USEABLE PAPER"

(p.13).

(7)Operation panel

Contains operation keys and indicator lights.

(8)USB 2.0 port (Type A)

(9)Front cover

Open to replace the toner cartridge etc.

(10)Side cover handle

Pull to open the side cover.

(11)Side cover

Open to remove misfed paper.

(12)Bypass tray guides

Adjust to the width of the paper when using the bypass tray.

(13)Bypass tray

Special paper (heavy paper or transparency film) can be fed from the bypass tray.

(14)USB 2.0 port (Type B)

Connect the USB cable to this connector when the machine is used on a USB connection.

(15)LAN connector

Connect the LAN cable to this connector when the machine is used on a network.

(16)Bypass tray extension

Open this tray when loading paper in the bypass tray.

This is used to connect a USB device such as USB flash memory to the machine.

7