Sharp MX-C300PE, MX-C300PL manual Cleaning the Laser Unit, Clean the laser unit

ROUTINE MAINTENANCE

5 Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.76), push the toner collection container into the machine.

• If this does not solve the problem, pull the knob out and push it back in 2 more times.

Note • When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the other.

•Touching the waste toner outlet or the toner collection container may soil your hands and clothes. Exercise caution when cleaning the charger.

CLEANING THE LASER UNIT

When the laser unit inside the machine becomes dirty, line patterns (coloured lines) may form in the printed image. Identifying lines (coloured lines) caused by a dirty laser unit.

If the above problems occur, follow the steps below to clean the laser unit.

1

2

3

Turn the power switch off.

Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.76), release the toner collection container.

Take out the cleaning tool for the laser unit.

The cleaning tool is attached to the front cover.

Pull the right side of the cleaning instrument and unfasten it from the claw.

(2)

(1)

(3) boss

4 Clean the laser unit.

(1) Push up and open the laser unit cover (grey colour).

(2) Point the cleaner down and gently push the cleaning tool all the way in.

(3) Gently pull the cleaning tool out.

80