Sharp MX-C300PE, MX-C300PL manual Wireless Infrastructure, Wireless Access Point

SYSTEM SETTINGS

Wireless (Infrastructure)

(Only on models with wireless LAN)

This sets connection using wireless infrastructure mode.

Manual Input of SSID

Enter up to 32 half-width characters for the SSID.

Security Type

Select the security type.

(none/WEP/WPA Personal/WPA2 Personal)

Setting of Encrypt

Select the encryption method based on the "Setting of Security Type" setting.

(none/WEP/TKIP/AES)

Security Key Settings

Set the security key used for wireless connection.

WEP	5 half-width numeric digits,
	10 hexadecimal (64 bit) digits,
	13 half-width numeric digits,
	or 26 hexadecimal (128 bit) digits
WPA	8 to 63 half-width numeric digits or
Personal	64 hexadecimal digits
WPA2
Personal

Wireless (Access Point)

(Only on models with wireless LAN)

This sets connection using wireless access point mode.

Setting of SSID

Enter up to 32 half-width characters for the SSID.

Security Settings

•Security Type

Select the security type.

(none/WEP/WPA Personal/WPA2 Personal)

•Setting of Encrypt

Select the encryption method based on the "Setting of Security Type" setting. (none/WEP/TKIP/AES)

•Security Key Settings

Set the security key used for wireless connection.

WEP	5 half-width numeric digits,
	10 hexadecimal (64 bit) digits,
	13 half-width numeric digits,
	or 26 hexadecimal (128 bit) digits
WPA	8 to 63 half-width numeric digits or
Personal	64 hexadecimal digits
WPA2
Personal

Device IP Address Settings

Set the IP address of the access point.

Channel Settings

Set the channel used for the access point.

Sending Output Settings

Set the transmission output of the access point.

Bandwidth Settings

Set the frequency band of the access point.

IP Addr. Distribution Range

Set the lease range and lease period of the IP address used for the access point.

89