SYSTEM SETTINGS

Factory default number for each colour is set to "4" respectively.

Increasing the number will make the print darker and decreasing the number will make it lighter.

Return to Default

The colour adjustment setting values can be initialized to the factory default ones by selecting [Return to Default] in [Colour Adjust.] menu.

(1)Select [Return to Default] in [Colour Adjust.] menu and press [OK] key.

(2)Confirmation screen appears and select [Yes] to initialize the value to default, or select [No] to return to [Mode Select] screen.

Security Settings

The following settings are related to security.

Select the [Security Settings] to configure the settings.

IPsec Settings

IPsec can be used for data transmission/reception on

anetwork.

IKEv1 Settings

Configure the IKEv1 settings.

Initialize Private Data and Data in Machine

The system-set values can be restored to the factory default state after eliminating the data stored in the machine.

Current values set for system settings

Current values set for network settings

User information > User registration information

User information > Paper limits

User information > Function usage restrictions

User information > User counts (Excluding default users)

Product key

94

Page 94
Image 94
Sharp MX-C300PL, MX-C300PE manual Return to Default, IPsec Settings, Initialize Private Data and Data in Machine