Sharp MX-C300PE Programming AN Administrator Password, Select System Settings with the or key

5

SYSTEM SETTINGS

PURPOSE OF THE SYSTEM SETTINGS

The system settings are used by the administrator of the machine to enable or disable functions to suit the needs of your workplace.

PROGRAMMING AN ADMINISTRATOR PASSWORD

The administrator password is a 5-digit number that must be entered in order to access the system settings. The administrator (administrator of the machine) should change the default administrator password that was set at the factory to a new 5-digit number. Be sure to remember the new administrator password, as it must be entered each time the system settings are subsequently used. (Only one administrator password can be programmed.)

Refer to the Start Guide for the factory default administrator password.

1 Press the [SPECIAL FUNCTION] key ( ).

The special function screen will appear.

2	Select "System Settings" with the [ ] or [ ] key.
3	Press the [OK] key.

The administrator password entry screen appears.

4 Use the numeric keys to enter the five-digit administrator password.

•If this is the first time you are programming the administrator password, enter the factory default code. (Refer to the Start Guide)

•" " appears for each digit that you enter.

•The mode select screen will appear with "Change Admin PW" selected.

5 Press the [OK] key.

The administrator password change screen appears.

6

7

Enter the new 5-digit administrator password with the numeric keys.

Any 5 digits can be used for the administrator password.

Press the [OK] key.

•The previously programmed administrator password is replaced by the new administrator password.

•Press the [HOME] key () to return to the base screen.

83