Sharp MX-C300PE, MX-C300PL manual Replacing the Toner Cartridge, Open the front cover

TROUBLESHOOTING

REPLACING THE TONER CARTRIDGE

When the "Prepare a new toner." appears, little toner remains.

You should keep one set of replacement toner cartridges on hand so that you can replace a toner cartridge immediately when toner runs out.

Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.

If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out.

Colours that are running low or have run out of toner are indicated in

().

: Yellow toner

: Magenta toner

: Cyan toner

: Black toner

Replace the toner cartridges of the indicated colours.

• If any one of the toner

Note colours runs out (including black toner), colour printing will not be possible.

If Y, M, or C toner runs out but Bk toner remains, black and white printing will still be possible.

•	Be sure to install 4 toner
	cartridges (Y/M/C/Bk).
•	Do not throw the toner
Warning	cartridge into a fire.
	Toner may splatter and
	cause burns.
•	Store toner cartridges out
	of the reach of small
	children.

1

2

Open the front cover.

Push on both ends of the front cover and open it.

Locations of colour toner cartridges

(A)(B) (C) (D)

(A): Yellow

(B): Magenta

(C): Cyan

(D): Black

Grasp the handle of the top and bottom of the toner cartridge, pull the toner cartridge out.

Caution	After removing the toner cartridge, do not shake it or tap on it. Doing so
	may cause toner to leak from the cartridge. Put the old cartridge
	immediately in the box of the new cartridge.
Note	Keep used toner cartridges (do not discard them).
	Your service technician will collect used toner cartridges.

74