FINAL CHECKLIST
To prevent improper connections leading to dam- age of electrical components and so voiding the warranty, the following steps must be performed:
1.Check the electrical requirements and make sure you have the correct electrical supply and that the oven is properly grounded.
2.Turn on the power supply to the oven. When the oven is first turned on, a time will flash on the clock. This is the time of the last power interrup- tion.
10: 08AM
3.Check power at the junction box wires using a volt meter having a range of
4.Set the clock by following these steps: a). Touch TIME pad.
b). Turn rotary knob clockwise until CLOCK appears.
c). Touch TIME pad.
d). Turn rotary knob in either direction. The time displayed will change in
e). Touch TIME pad. The clock is now set.
5.Test the BAKE mode with the following steps: a). Touch COOKING MODE pad.
b). Turn rotary knob clockwise until BAKE ap- pears.
c). Touch START pad. The cooling fan and oven lights turn on and the word, PREHEAT, is displayed.
d). The control will beep and the word, PRE- HEAT, will disappear when the set tempera- ture (350º F) is reached.
e). Touch CANCEL pad to turn oven off.
6.To check the other oven functions refer to the Using the Oven Controls section of the USE AND CARE MANUAL.
7.If the oven is working properly, press the rotary knob so that it is flush with the oven and turn off the power supply to the oven.
8.Place the cover on the junction box and make sure the cover is securely fastened and turn on the power to the oven.
9.Leave these INSTALLATION instructions as well as the USE AND CARE MANUAL with the owner.
5551 McFadden Avenue, Huntington Beach, CA 92649 •
PB