![](/images/new-backgrounds/1057358/5735841x1.webp)
Dinion Day/Night CameraConfiguration en 21
| Up key |
| Menu/Select key (center) |
| Right key |
| Down key |
Figure 4.3 Navigation | Left key |
–Use the up or down keys to scroll through a menu.
–Use the left or right keys to move through options or to set parameters.
–When in a menu, quickly
–To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item.
Some menus automatically close after about two minutes; other menus have to be closed manually.
4.2Camera control communication (Bilinx)
This camera is equipped with a coaxial communications transceiver (also referred to as Bilinx). In combination with VP- CFGSFT, the camera setting can be changed from any point along the coaxial cable. All menus can be accessed remotely giving full control of the camera. With this method of communication it is also possible to disable the local keys on the camera.To avoid loss of communication on an installed camera, the COMM On/Off selection is not available while using remote control. This function can only be accessed with the camera buttons. Bilinx communications can only be disabled using the buttons on the camera.
Disabled camera buttons
When the Bilinx communications link is active, the buttons on the camera are disabled.
Bosch Security Systems | Installation and Operation manual | F.01U.163.823 v1.0 2010.01 |