![](/images/new-backgrounds/1057358/5735831x1.webp)
16 en Connections | Dinion Day/Night Camera |
|
|
3.4Lens mounting
The camera accepts
CAUTION!
To avoid damaging the CCD sensor when using a
Lenses weighing more than 0.5 kg (1.1lbs) must be separately supported.
| Bosch |
Figure 3.5 | Mounting a lens |
| Bosch |
Figure 3.6 | Lens connector |
Pin | Video iris lens | DC iris lens |
|
|
|
|
|
1 | Supply (11.5V ±0.5, 50mA max.) | Damp - |
|
|
|
|
|
2 | Not used | Damp + |
|
|
|
|
|
3 | Video signal 1Vpp 1kOhm | Drive + |
|
|
|
|
|
4 | Ground | Drive - |
|
|
|
|
|
Note
If a short circuit is detected on the lens connector, the on- screen display (OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the lens connector and check the pin connections.
F.01U.163.823 v1.0 2010.01 | Installation and Operation manual | Bosch Security Systems |