Bosch Appliances LTC 2605/91 Operation, 8.0MAINTENANCE, 9.0REPLACEMENT PARTS, En

Video Manager Instruction Manual Operation EN 16

Functional Notes for Figures 7 & 8:

1.Using keyboard 1, full control of the selected video device is available on the monitors connected to Video Manager outputs 1A and 1B.

2.Using keyboard 2, full control of the selected video device is available on the monitors connected to Video Manager outputs 2A and 2B.

3.Using keyboard 3, full control of the Monitor A or Monitor B outputs of the selected video device is available on the monitor connected to Video Manager output 3A.

4.Using keyboard 4, full control of the Monitor A or Monitor B outputs of the selected video device is available on the monitor connected to Video Manager output 4A.

NOTE: No special alarm monitor switching is supported when four keyboards are connected in the system.

7.0 OPERATION

Video Manager operation is automatic. The unit completely configures itself during the power-on process, based on the quantity of keyboards and the types of video devices being used.

Refer to the instructions supplied with the video devices and/or the keyboards for complete information on the operation of the video devices and any pan/tilt/zoom equipped cameras connected to them.

8.0MAINTENANCE

The Video Manager does not require any special maintenance.

9.0REPLACEMENT PARTS

Item:	Part number:
Replacement Rack Mount Kit	303 1895 501

Replacement Keyboard Data Cable

303 0239 001

Replacement 390 Ohm Termination Device 303 2728 001

Replacement AC Line Cord, 120 VAC

Source from local supplier

Replacement AC Line Cord 220-240 VAC Source from local supplier

Bosch Security Systems December 5, 2005