LTC 4600 Series Instruction Manual Installation
4.5LTC 4630, LTC 4631, Series Modules for Bilinx Video/Data Transmissions
4.5.1Important Considerations
1.To ensure proper Bilinx communications, the video output of the LTC 4631 Series module must be terminated into a proper 75 ohm load. If improper video looping connections are used, erratic or no camera P/T/Z control may result.
2.Do not exceed the published distance specification for Bilinx communications. Erratic or no camera P/T/Z control may result. Refer to the data sheet for product specifications.
3.Although these modules are compatible with Bilinx
Typical Configuration:
EN 11
4.5.2Indicators / Operation
1.The POWER LED illuminates when AC power is applied to the unit.
2.LTC 4631 Series units: Once the video signal and fiber optic connections have been completed, the state of the VIDEO OUT and AGC LED indicators should be examined. If both are GREEN, test the VIDEO OUT LED action by temporarily removing the video signal from the LTC 4630 module. The LED should turn RED.
If necessary, adjust the AGC control in small increments until the correct LED actions are obtained. Marginal signal strengths are indicated by an AMBER color LED, and a RED LED indicates video loss, or that further adjustments are needed. The adjustment is sensitive. Adjust the control too high, and the VIDEO OUT LED may remain lit even when the video signal is removed or lost. If adjusted too low, the VIDEO OUT LED may remain RED even if a video signal is present.
| LTC 4630 |
|
|
|
|
|
|
| BILINX/UP THE COAX |
|
|
|
|
| |
VIDEO TRANSMITTER + DATA RECEIVER |
|
|
|
|
| ||
|
|
| OPTICAL CABLE |
|
|
| |
|
|
|
|
| VIDEO + Bilinx DATA |
|
|
|
|
|
| VIDEO IN |
|
|
|
POWER |
|
|
|
| BLUE |
|
|
|
| AC - 3 | - 2 |
|
|
| |
|
| POWER | - 2 | GREEN |
|
| |
|
| AC - 1 | +12VDC - 1 |
|
|
| |
|
|
| BROWN |
|
| ||
|
| 24VAC CT | +12VDC |
|
| ||
|
| POWER |
|
| |||
|
|
|
|
|
| ||
|
|
|
|
| SUPPLY |
| |
|
|
|
|
|
| AUTODOME SERIES | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| P/T/Z CAMERA |
|
|
|
|
| AC |
|
|
|
| VIDEO + Bilinx DATA |
| POWER |
|
| |
Up to 600 m (2000 ft) using |
|
|
|
|
|
| |
62.5/125 micron |
|
|
|
|
|
|
|
Multimode Fiber Optic Cable |
|
|
|
|
|
| |
|
|
|
|
| TYPICAL ALLEGIANT SERIES SWITCHER/CONTROLLER, |
| |
|
|
|
|
| DIVAR DIGITAL VIDEO RECORDER, BILINX | VIDEO | |
LTC 4631 |
|
|
|
| CONFIGURATION TOOL PROGRAM, OR OTHER BOSCH | ||
|
|
|
|
| |||
BILINX/UP THE COAX | OPTICAL CABLE |
|
|
| SECURITY SYSTEMS CONTROL SYSTEM |
|
|
VIDEO RECEIVER + DATA TRANSMITTER |
|
|
|
|
|
| |
|
|
|
| ALLEGIANT Video System |
| BOSCH | |
|
|
|
|
|
| ||
|
|
|
|
| CODE OUT ALARM | STATUS BATTERY LOW | POWER |
VIDEO OUT |
|
|
|
| VIDEO | DATA |
|
|
|
|
|
|
| ||
AGC LEVEL |
|
|
|
| ALLEGIANT Bilinx Data Interface |
| BOSCH |
|
|
|
|
|
| Status/Power | |
|
|
|
|
|
|
| BOSCH |
AGC |
|
|
|
| LTC 8016 ALLEGIANT |
| |
| VIDEO OUT |
|
|
|
| ||
|
|
|
| BILINX DATA INTERFACE |
| ||
POWER |
|
|
|
|
| ||
|
|
|
| VIDEO + Bilinx DATA |
|
| |
| - 2 | BLACK |
|
|
| ||
|
|
|
|
| |||
POWER |
|
|
|
|
| INTUIKEY® SERIES KEYBOARD | |
+12 VDC - 1 |
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
| BLACK with | POWER |
|
|
| |
|
| WHITE |
|
|
| ||
|
| SUPPLY |
|
|
| ||
|
| MARKINGS |
|
|
| ||
|
|
| AC |
|
|
| |
|
|
|
|
|
|
| |
|
|
|
| POWER |
|
|
|
Figure 4 LTC 4630 Series and LTC 4631 Series
Bosch Security Systems July 08, 2008
