![](/images/new-backgrounds/1073899/7389947x1.webp)
4.Place the cover on the bowl, as shown in figure 22b. There is a safety interlock in the handle of the
Note: The disc and disc holder will not turn when the power unit is started unless the cover has properly engaged the interlock. This is a special safety feature of the food processor bowl.
The cover has an integral feeding funnel with a pusher/measuring cup. The pusher/measuring cup may be removed to add ingredients, but the cover and pusher must be in place whenever the power unit is in operation.
Placing into Operation with Discs Make sure the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into a convenient outlet. The
Place items to be sliced, shredded or grated in feeding funnel and be sure to use the pusher to feed items into the discs when in operation.
Refer to Slicer/Shredder section of this manual, page19, for examples and tips on how the discs may be used for slicing, shredding and grating.
Just as when using the slicer/shredder, be sure to watch the level in the bowl and stop the slicing, shredding or grating before the level of the material being sliced, shredded or grated reaches the level of the disc holder.
Removing Contents
Before beginning to remove the contents from the
CAUTION
Blades on discs are very sharp.
Handle with care.
The contents of the bowl may now be poured into a suitable container or bowl, as desired.
Care and Cleaning
of Discs, Disc Holder and Bowl
All components of the food processor are dishwasher safe. Do not use scouring cleaners on any of the slicer/shredder parts.
The power unit of the kitchen machine should be cleaned with a clean, damp cloth only. Never use coarse or caustic cleaning products to clean this appliance. Never immerse the power unit in water.
24