Bosch Appliances NDN-265-PIO installation manual Installation, Disassembly

12 en Installation IP Camera 200 Series

3Installation

3.1Disassembly

The camera/housing consists of the following parts:

x4

1.Dome

2.Inner liner

3.Camera module and mounting base

To disassemble the unit proceed as follows:

1.Using the special screwdriver bit supplied, loosen the four tamper-resistant screws in the dome (the screws remain in place).

2.Remove the dome from the base.

3.Remove the inner liner by pulling it off the base.

AM18-Q0616 v1 2012.02 Installation Manual Bosch Security Systems