22 en | Installation IP Camera 200 Series
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
3.8.2 Focal length and focus
Adjust the focal length (zoom) and focus as follows:
1. To set the field of view of the varifocal lens, loosen the
focal length screw and turn the mechanism until the
required view is displayed on the monitor (Image goes out
of focus.)
2. Focus the image on the monitor by loosening the focus
screw with the tool provided and turning the mechanism
until the image is in focus.
3. Readjust the focal length if necessary.
4. Repeat these two adjustments until the desired view is in
focus.
5. Tighten both screws.
1. Focus
2. Focal length (zoom)