Bosch Appliances NDN-832 installation manual Using the install wizard, Adjustment procedure

34 en Installation FlexiDomeHD 1080p IP Camera

5.9Using the install wizard

The Menu button on the control panel is used to access the camera install wizard. When there is a choice in the wizard, the options are selected by either a short press or a longer press of the button.

The wizard handles the following functions:

–Lens identification

–Zoom and focus adjustment conditions

–Image orientation

–Auto back focus

Run the wizard to adjust the focus. This optimizes picture sharpness in both bright and low-level lighting.

5.9.1Adjustment procedure

If you have set up the camera and pressed the Menu button as described in Section 5.7 Camera set-up, page 30 then you see the following on the monitor screen:

Lens type

MBF feedback

Auto MBF 180° MBF info

–The lens type is identified and shown on the screen.

–The iris is opened to its maximum value.

1.Manually adjust the focal length (zoom) on the lens to obtain the required field of view.

2.Manually adjust the focus on the lens to obtain the sharpest image possible.

3.To rotate the image 180°, press and hold the Menu button until the image flips.

AM18-Q0601 v1.0 2012.01 Installation Manual Bosch Security Systems