26 en Installation | FlexiDomeHD 1080p IP Camera |
|
|
contact can be used as the actuator (use a
–Refer to the cable tree table to identify the wire colors for connecting the alarm input.
–Configurable as active low or active high.
Alarm output
Use the alarm relay output for switching external devices such as lamps or sirens.
–Refer to the cable tree table to identify the wire colors for connecting the alarm output.
–In the menu system, configure the relay output to operate as either normally open (NO) or normally closed (NC).
Audio in / Audio out
The unit has
Refer to the cable tree table to identify the wire colors for connecting the audio input and output.
Audio in: Line input level (not suitable for direct microphone signal).
Audio out: Line output level (not suitable for direct speaker connection).
Wiring: Shielded audio connection cable is advised.
Installation Manual | Bosch Security Systems |
