FlexiDomeHD 720p IP Camera | Installation en 35 |
|
|
5.6Closing the unit
When the camera position is set and all adjustments have been made, close the unit.
1.If necessary, remove the adjustment cap from the lens.
2.Place the inner liner in position aligning its fin with the bracket on the base.
3.Place the dome onto the base and rotate until it clips into place. (If necessary, clean its surface with a soft cloth.)
4.Place the sealing ring and the trim ring over the dome.
5.Align the
6.Use the supplied special screwdriver bit to tighten the three
Bosch Security Systems | Installation and Operation Manual |