Bosch Appliances NDN-921 operation manual Decoder, SSL encryption, Auto-connect, Audio

FlexiDomeHD 720p IP Camera Advanced Mode en 83

split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to display the alarm image. Refer to the destination device documentation concerning image display options and available video outputs.

Decoder

Select a decoder of the receiver to display the alarm image. The decoder selected has an impact on the position of the image in a split screen.

SSL encryption

SSL encryption protects data used for establishing a connection, such as the password. By selecting On, only encrypted ports are available for the Remote port parameter. SSL encryption must be activated and configured on both sides of a connection. The appropriate certificates must also have been uploaded. Configure and activate encryption for media data (video, metadata) on the Encryption page.

Auto-connect

Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure.

Audio

Select On to transmit the audio stream with an alarm connection.

Bosch Security Systems Installation and Operation Manual AR18-10-B013 v1.52 2011.06