Bosch Appliances NDN-921 9.6Alarm, 9.6.1Alarm Connections, Connect on alarm, Destination password

FlexiDomeHD 720p IP Camera Advanced Mode en 81

9.6Alarm

Alarm

>Alarm Connections

>VCA

>Audio Alarm

>Alarm E-Mail

>Alarm Task Editor

9.6.1Alarm Connections

Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to ten IP addresses in the order listed until a connection is established.

Connect on alarm

Select On so that the camera automatically connects to a pre- defined IP address in the event of an alarm. Select Follows input 1 so that the device maintains the connection for as long as an alarm exists.

Number of destination IP address

Specify the numbers of the IP addresses to be contacted in the event of an alarm. The device contacts the remote locations one after the other in the numbered sequence until a connection is made.

Destination IP address

For each number, enter the corresponding IP address for the desired remote station.

Destination password

If the remote station is password protected, enter the password here.

Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling

Bosch Security Systems Installation and Operation Manual AR18-10-B013 v1.52 2011.06