Bosch Appliances NKT 92, NKT 72 instruction manual Final Check List

Final Check List

To prevent improper connection leading to damage of electrical components and so voiding the warranty, the following steps must be performed:

1.Check the electrical requirements and make sure you have the correct electrical supply and that the cook-top is properly grounded.

2.Make sure all control knobs are in the off position.

3.Turn on the power supply to the cook-top.

4.Check power at jnnction box wires using a volt meter having a range of 0-250 VAC. The voltage reading between the black and red wires (Line to Line) should be 220 to 240 volt when connected to 240 volt supply or 190 volt to

208 volt when connected to 208 volt supply.

5.Depress and rotate each control knob to the number "9" position. Observe indicator lights to assure they are working.

Note: The residual heat indicators must be

heated to temperature before they glow.

46.If the cook-top is operating properly rotate each control knob to its off position and turn off the power supply to the cook-top.

7.Place cover on the junction box and make sure cover is securely fastened and turn on the power to the cook-top

8.If there is going to be some time before the owner uses the cook-top. It is recommended that, after waiting for the cook-top to cool, that

a sheet of packing be placed over the cook-top to protect the surface from damage prior to use

by the owner.

9.Leave these INSTALLATION instructions as well _tsthe OPERATING Manual with the

owner.

Personal Injury Hazard

Do Not touch cooktop surface. Areas near elements may be hot.

Touching a heated cooking surface could result in a serious burn.

II