Attaching Fastening Rails
used for both NKT 72 and NKT 92 series
90*
To attach the fastening rails:
I.Mark the center as shown in drawing.
2. Align rails using notch.
3.Secure the rails tightly using screws.
Note: a. The top flange of rail must sit tightly against the counter top.
b. If counter top is tiled, the lower screws holes in the rails should be
used.
SPECIAL NOTE:
Use plugs or sleeves for screws or glue rails in
place, using a temperature resistant two component adhesive which is suitable for bonding metal to stone, when installation is in granite or marble counter top.
Important:
•Do all counter top preparation, before installing the
•Seal the cut surfaces with silicone rubber, heat resistant enamel or casting resin, to seal the surface against moisture.