Bosch Appliances NKT 72, NKT 92 Electrical Connections, FigureA, Figure B, Grounded neutral

J

t

-i

Electrical Connections

This appliance is manufactured	with a green and		Cable from
yellow striped GROUND wire connected to the			power supply
		Grounded neutral	Junction box
cook-top chassis. After making sure that the power
has been turned off connect the flexible conduit
from the cook-top to the junction box using a U.L.		Red wires
listed conduit connector, see figures A and B.
Figures A and B and the instructions provided
below present the most common way of
connecting the cook-tups. Your local codes and
ordinances, of course, take precedence to these
instructions. Complete electrical	connections

according to local codes and ordinances.

Twist-on connectors

3-wirebranch circuit

Refer to Figure A, where local codesallow the connection of GROUND wire to the branch circuit NEUTRAL (grey or white wire):

•If local codes permit, connect the green and yellow striped GROUND wire from the cook-top to the branch circuit NEUTRAL wire (grey or white color wire).

•Connect the red and black leads from the cook-top to the corresponding leads in the junction box.

White wire

	Green wire	U.L.Listed conduit
FigureA	with yellow	connector
	Cable from
	stripes
	cook-top

	Cable from
	power supply
Ungrounded neutral	Junction box

Red wires

Twist-on. connectors

4-wire branch circuit

Refer to Figure B:

•Connect the green and yellow striped GROUND wire from the cook-top to the GROUND wire in the junction box (bare or green color wire).

•Connect the red and black leads from the cook-top to the corresponding leads in the junction box.

•Place a twist-on connector on the end of the NEUTRAL (grey or white) Wire.

Black wires

Rare	or
green	wire
	Green wire	U.L, Listed conduit
	with yellow
Figure B	stripes	connector
	Cable	from

cook-top

10