IP Camera 200 Series | Installation en 19 |
|
|
3.7.1Camera positioning
The camera position can be adjusted along three axes. When adjusting ensure that the picture display on the monitor is level.
Set the camera to the desired position using the supplied Torx screwdriver:
1.For vertical adjustment (1), loosen the locking screw and move the camera housing to the desired angle. Tighten the screw.
2.For horizontal adjustment (2), loosen the locking screw and rotate the camera housing around the base. Tighten the screw.
3.To obtain a horizontal horizon (3), rotate the camera body as necessary to align the picture shown on the monitor.
Bosch Security Systems | Installation Manual |
