Bosch Appliances NTC-265-PI installation manual Network and power connector, RJ45 Ethernet PoE

14 en Installation IP Camera 200 Series

3.3Network (and power) connector

RJ45

Ethernet (PoE)

Figure 3.2 Network connection

–Connect the camera to a 10/100 Base-T network.

–Use a shielded UTP Category 5e cable with RJ45 connectors.

–Power can be supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet

(IEEE 802.3af) standard.

CAUTION!

This equipment is only to be connected to PoE networks without routing to outside plant.

AM18-Q0610 v1 2012.02 Installation Manual Bosch Security Systems