IP Camera 200 Series | Installation en 13 |
|
|
3.2Mounting
x4
M4 (Ø3.3 mm)
x4
Figure 3.1 Mounting the camera
To mount the camera to a wall or ceiling:
1.Stick the supplied installation paper sticker to the surface taking care to orientate it correctly.
2.Drill four holes with a diameter of 6 mm.
3.Insert the supplied plugs into the holes.
4.Attach the camera and base unit securly to the surface using the two supplied M4 screws.
CAUTION!
Do not point the camera/lens into direct sunlight as this may damage the sensors.
Bosch Security Systems | Installation Manual |
