Plena Mixer Amplifier Installation and User Instructions Description
en 9
2.4Controls, connectors and indicators
2.4.1Front panel
See figure 2.2 for an overview of the controls and indicators.
1 Power button.
2Label holder for
created by user.
3Master high tone control for microphone/line inputs.
4 Label holder for
5 Master high tone control for music inputs.
6 Label holder for
names - custom labels can be created by user.
7 Master volume control - controls all inputs except emergency and call station.
8 Output level meter
9 Input level control:
•microphone/line 1
•microphone/line 2
•microphone/line 3
•microphone/line 4
•microphone/line 5
•microphone/line 6
10Master low tone control for microphone/line inputs.
11Music source selector (for music inputs 1, 2, and 3).
12Music source volume control.
13Master low tone control for music inputs.
14Zone 1 selection button.
15Zone 2 selection button
16 Air inlet holes.
Note
Do not obstruct the airflow into the unit.
17 Headphone socket.
Note
Users can create custom labels for the: microphone/line inputs, description of the music sources, and audio output zones 1 and 2. These labels can be attached to the mixer amplifier at position numbers 2, 4, and 6 (see figure 2.2). Colored pins can also be inserted at various positions around the dial controls to indicate the favorite settings for a particular application. For more information on inserting and removing pins, see section 4.3.2.
2.4.2Plena PLE-WP2Z3S wall panel
The optional Plena
The zone can be activated or deactivated, and the music source can be easily changed. The status of each zone and music source is indicated by an LED.
A standard CAT 5 cable is used to connect the wall panel to the
1 | 2 | 3 |
| 4 | 5 |
| 6 | 7 | 8 |
|
|
|
|
|
|
|
|
| B |
9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |
figure 2.2: Front panel
Bosch Security Systems
