14 en Operation

UHI-SBG-0 Series

 

 

6.Secure the housing to the mount by attaching two 1/4-20 x 0.50 in. screws and two 1/4 in. washers. The washers must be used for the screws to thread properly.

NOTE! The outermost set of 1/4-20 threaded holes are for mounting to feed-through mounts

i and the innermost 1/4-20 holes are for mounting to all other mounts and pan/tilts (see Figure 1). For mounting to all other mounts and pan/tilts, refer to the specific device’s installation guide.

6.1Installing the Camera Tray

Verify operation of the camera and lens and adjust the camera focus and iris as necessary. See the instruction manual for your specific camera.

Installing the Camera Tray

1.Slide the camera tray with attached camera (see Section 5.5: Attaching the Camera and Spacer to the Tray) into the slot of the housing.

2.Secure the camera tray with screw.

6.2Connecting the Wires

Before proceeding, verify that the BNC for the Video Coax Cable is separated from the mains power connections / circuitry and there is a physical spacing barrier between cables. For wir- ing video coax connections, use only the cables specified in Section 4: Cable Requirements.

Connecting the Wires

1.Attach the BNC connector to the coax.

2.Connect the coax cable to the camera.

3.Connect the power leads from the source to the terminated block.

4.Connect the wires from the terminal block to the camera.

5.Tighten the fittings to 8.5 N.m to 9.0 N.m (75 in. lb to 80 in. lb). The torque rating is approximately 1 to 1-1/2 turns past the point where the fitting starts to grip the wire.

•Tighten all fittings to ensure a liquid-tight seal. Failure to do so could allow moisture to enter the housing and damage electronic parts, camera, and lens.

•If a sealant is used, be sure it is a neutral cure type. Sealants that release acetic acid may harm camera electronics.

•Use of drip loops is recommended on the wiring outside of the rear end cap.

6.Use the provided hole plugs to plug any unused holes.

7.Close the cover and secure the tamper-resistant screws with the supplied wrench.

7 Operation

These housings require no operational adjustments other than camera/lens adjustments.

8 Maintenance

No special maintenance is required other than occasional cleaning of the window. Regularly scheduled maintenance will help prolong the operation life of this unit. Clean the viewing win- dow as needed with a mild, nonabrasive detergent in water and a soft cloth.

September 15, 2006 F01U032279_01

Installation Manual

Bosch Security Systems, Inc.

Page 22 Page 24
Page 23
Image 23
Bosch Appliances UHI-SBG-0 installation manual Operation, Maintenance, Installing the Camera Tray, Connecting the Wires
Page 22 Page 24

UHI-SBG-0 specifications

Bosch Appliances has long been synonymous with quality and innovation, and the UHI-SBG-0 is a stellar representation of this legacy. This undercounter refrigerator is designed with both functionality and style in mind, making it an essential addition to any modern kitchen.

One of the standout features of the UHI-SBG-0 is its spacious interior. With a net capacity that allows for ample storage, it is designed to accommodate various food items and beverages. Its shelving system is adjustable, providing flexibility to adjust the space according to your storage needs. The unit also includes a dedicated crisper drawer for fruits and vegetables, ensuring that they stay fresh for longer periods.

Energy efficiency is a hallmark of Bosch appliances, and the UHI-SBG-0 is no exception. Engineered with cutting-edge technology, it boasts an impressive energy rating that helps in reducing electricity bills while being environmentally friendly. The Eco mode conserves energy without compromising performance, making it a great choice for eco-conscious consumers.

The refrigerator also incorporates Bosch's MultiAirFlow system, which ensures even cooling throughout the interior. This technology helps maintain a consistent temperature, preventing hotspots that can lead to food spoilage. Additionally, the integrated air filter minimizes odor transfer, keeping food items tasting fresh.

For added convenience, the UHI-SBG-0 comes equipped with a user-friendly control panel that allows you to easily adjust temperature settings and access various modes. The soft-close door feature enhances usability by allowing the door to close gently without slamming.

Another key characteristic of this appliance is its sleek design. With a stainless steel finish, the UHI-SBG-0 adds a modern touch to any kitchen decor. Its undercounter design not only saves space but also complements the cabinetry, providing a seamless look.

Safety features are also integrated into the design, ensuring that the Bosch UHI-SBG-0 operates smoothly. The unit is equipped with an audible alarm that signals when the door is left open, preventing unnecessary energy loss and maintaining optimal temperature conditions inside.

In summary, the Bosch Appliances UHI-SBG-0 undercounter refrigerator combines generous storage capacity, energy efficiency, advanced cooling technologies, and elegant design. It is perfect for homeowners looking to elevate their kitchen experience with a reliable and stylish appliance. This refrigerator epitomizes Bosch’s commitment to quality and innovation in home cooking solutions.
Top Page Image Contents