Bosch Appliances UML-191-90, UML-151-90, UML-171-90 Safety Precautions, Important Notices

General Purpose LCD MonitorsSafety en 3

1.2 Safety Precautions

DANGER! High risk:

This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.

!	WARNING! Medium risk:
	Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily
	injury or death.
!	CAUTION! Medium Risk
	Indicates a potentially hazardous situation. If not avoided, this may result in minor or
	moderate injury. Alerts the user to important instructions accompanying the unit.
!	CAUTION! Low risk: (without safety alert symbol)
	Indicates a potentially hazardous situation. If not avoided, this may result in property
	damage or risk of damage to the unit.
i	NOTICE!
	This symbol indicates information or a company policy that relates directly or indirectly to
	the safety of personnel or protection of property.
1.3	Important Notices
	Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit
	may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,
	stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use
	caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
	Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to
	overturn. Mount the unit per the manufacturer's instructions.
	All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at
	least 3 mm in each pole, into the electrical installation of the building.
	If it is needed to open the housing for servicing and/or other activities, use this all-pole switch
	as the main disconnect device for switching off the voltage to the unit.
	Camera grounding - For mounting the camera in potentially damp environments, ensure to
	ground the system using the ground connection of the power supply connector (see section:
	Connecting external power supply).
	Camera lens - An assembled camera lens in the outdoor housing must comply and be tested
	in accordance with UL/IEC60950. Any output or signal lines from the camera must be SELV or
	Limited Power Source. For safety reasons the environmental specification of the camera lens
	assembly must be within the environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
	Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140
	feet, in accordance with NEC800 (CEC Section 60).

Bosch Security Systems, Inc. User’s Manual F.01U.127.338 2.0 2009.05