AutoDome Power Supply Boxes Installing the Power Supply Box | en 17
Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08
3. While holding the top hinge pin open, position th e cover
door to the power supply box and align its hinges.
4. When the hinges are aligned, release the top hinge pin to
engage its mating hinge on the power box. Then release
the bottom hinge pin from the hinge pin stop to complete
attaching the cover door to the power supply box.
NOTICE!
After all wiring is complete, close the cover door and tighten
the two (2) captive screws on the cover door to 10-12 N-m (90-
105 in.-lbs) to ensure the power supply box is watertight.