AutoDome Power Supply Boxes Cable and Wire Standards | en 27
Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08
3.3.3 Using Ethernet to Transmit Video and Control
The AutoDome VG5 700 series connects to a 10 Base-T/100
Base-TX network either directly or via a switch. Both video and
control are transmitted over a standard TCP/IP network using
the built-in Web server.
3.3.4 Using Multi-mode Fiber Optic to Transmit Video and Control
Fiber Optic kits, available for AutoDome 100 and 600 Series
cameras, transmit both video and Biphase control over an
analog singlemode or multimode fiber.
CAUTION!
Ethernet connections must be made to non-exposed (indoor)
networks only.
Cable Type CAT-5E or CAT 6 Ethernet
Maximum Distance 100 m (328 ft)
Bandwidth 10 Base-T/100 Base-TX
Terminal Connector RJ45, Female
WARNING!
Do not connect a coaxial cable while the RJ45 Ethernet cable is
connected.
Multimode
Fiber Type 50/125 µm, 62.5/125 µm, low loss multimode glass
fiber
Maximum Distance 4 km (2.5 miles)
Minimum Bandwidth 20 MHz (Video - 850 nm / Control - 1300 nm)
Requirement Bosch LTC 4629 Fiber Receiver at controller end of
system
Terminal Connector ST
Singlemode
Fiber Type 9/125 µm, low loss single glass fiber
Maximum Distance 69 km (43 miles)
Minimum Bandwidth 20 MHz (Video - 1310 nm /Control - 1550 nm)
Requirement Single mode fiber receiver at controller end of
system
Terminal Connector ST