Manuals
/
Brands
/
Computer Equipment
/
Power Supply
/
Bosch Appliances
/
Computer Equipment
/
Power Supply
Bosch Appliances
VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2
- page 38
1
38
40
40
Download
40 pages, 1.83 Mb
38
en | Cable and Wire Standards
AutoDome Power Supply Boxes
F.01U.250.895 | 1.0 | 2011.08
Installation Guide
Bosch Security Systems, Inc.
Contents
Main
Page
Table of Contents
Page
1 Important Safety Instructions
1.1 Safety precautions
1.2 Important safety instructions
Page
1.3 Important Notices
Page
1.4 UL certification
1.5 Bosch notices
Page
2 Installing the Power Supply Box
2.1 Unpacking
2.1.1 Parts List
2.1.2 Optional Parts List
2.1.3 Description
2.2 Pre-installation Check List
Page
2.3 Mount the Power Supply Box
2.3.1 Attach Cover Door
Page
2.4 Route Wires and At tach Connectors
2.4.1 Methods for Routing Wires
AutoDome Power Supply Boxes Installing the Power Supply Box | en 19
Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08
Figure 2.3 VG4-A-PSU1 or VG4 -A-PSU2 Power Supply Box
1 24/120/230 VAC Power In
5 Coax, UTP Video, or Ethernet Wire
(Ethernet for VG5 700 Series only)
Page
2.4.2 Wiring the Power Supply Box
22 en | Installing the Power Supply Box AutoDome Power Supply Boxes
F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.
2.4.3 Power Supply Box Connections
1 Ground Screw 5 Power In 2 Transformer (115/230 VAC Modes)
8 Control Data and Video In/Out; 3/4 in. (20 mm) NPS Fitting
The following table lists the Power Supply Box connectors:
3 Cable and Wire Standards
3.1 Power 3.2 Wire Distance Guide
3.3 Video and Control Cables
3.3.1 Using Coaxial Cable to Transmit Video and Control
3.3.2 Using UTP to Transmit Video and Control
3.3.3 Using Ethernet to Transmit Video and Control
3.3.4 Using Multi-mode Fiber Optic to Transmit Video and Control
3.3.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video and Control
3.4 Control-only Cables
3.4.1 Controlling the AutoDome via Biphase
3.4.2 Controlling the AutoDome via the RS232 Protocol
100
Page
3.4.3 Controlling the AutoDome via the RS485 Protocol
100
3.5 Fiber Optic Module with an RS232/RS422 Controller
3.5.1 Connecting to an LTC 4629 Head End Data/Video Transceiver
3.5.2 Configuring the VG5 AutoDome
Page
3.6 Audio Cables
