Bosch Appliances WFL 2060 manual Installation, Connection, andTransport, Safety, information, Risk

					To	drain		the		pump refer to page￿20.
					To	drain		the		water hose(s) refer to page￿22.
Installation,
					Take		care		not to damage		the washing machine.
Connection					Do￿not hold onto protruding parts (e.g.￿loading
					door)		when		lifting.
and￿Transport					In	addition			to	the safety information listed here, t
					local￿water and electricity supplier may have specia
Safety	information				requirements.
					If	in	any doubt, have the appliance connected by
￿	RISK	OF INJURY!	￿		an	authorized				technician.
				whenFactory%supplied							equipment
The washing machine is heavy. Take			care
lifting￿it.					There		is a packet of accessory parts supplied w
					your		washer.			Check to make sure that the
	CAUTION
					accessory parts supplied for your model are all
					there. If any parts are missing, contact your deal
Frozen hoses can tear / burst. Do not install the
washing	machine	outdoors or in an	area prone immediately.
to frost.					Inside		the		drum:

Be sure to observe all listed warnings and cautions.

These installation instructions are intended for use by qualified installers. In addition to these instructions the washer shall be installed:

-In the United States, in accordance with the National Electric Code, ANSI/NFPA70￿~ latest edition/State and Municipal codes and/or local codes.

-In Canada, in accordance with the Canadian

Electric Code C22.1￿~ latest edition/State and

Municipal codes and/or local codes.

If the	washing machine is located in a room which
will be	exposed to		freezing	temperatures, or if it	is
located	in	a cabin	that is being shut down for		-		Water		supply hoses (cold	and hot	water).
					the
winter,	any	residual	water in	the pump or water	i	let		dampness inside the drum is left over from
					Any
hose(s)	must be drained.				testing which every washing					machine	is subjected
					to	before			leaving the factory.

2￿