Cleaning | water | inlet | strainers | Cleaning the strainers on the washing machin |
| ||||
This is necessary if very | little or |
| On both the hot and cold water tap: | |
no water flows into | ||||
the washing | machine. |
|
|
|
irst release the water pressure in the supply hoses:
Turn off the water taps.
Turn the program selector to any program (except Spin orDrain).
Press theStart button, and allow the program to run for approx. 40 seconds.
Turn the program selectorOffto.
Cleaning the strainer(s) at the water tap
On both the hot and cold water tap:
Disconnect the hose from the back of the washing machine.
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
Pull out the strainer and rinse under running water.
Insert the strainer and reconnect the hose.
Turn | on the water tap | and check | whether wa |
is still discharged. If water is still discharged, | |||
check | that the strainer | is attached | properly. |
Turn off the water tap.
