Bosch Appliances WTXD5500UC manual Operation, Using the dryer, Led

Ensure that there is only

laundry in the drum. Check that all items are completely in the drum.

6. Close the door.

5. Place laundry in the empty drum. Put each piece of laundry into the machine separately.

For best results the laundry to be dried must be sorted according to type of laundry and desired degree of drying. For further information see page￿17.

Observe drying symbols of the laundry manufacturer. If drying woolen clothing and shoes, see the information on page 21.

The estimated remaining time will be updated.

Operation

Using the dryer

4. If required, select •option" by pressing the button.

The "options" are explained on page 18.

i

1. Open the door.

2.Check lint filter.

The filter should be cleaned after and before every drying process. Cleaning the filter reduces the drying time and saves energy.

i

3.Rotate program selector to the desired program.

Select the program which corresponds to the laundry in the dryer from the program

selection table (see page 19). The •start/stop" indicator light starts

The dryer light turns on inside flashing. the drum.

7. Press the start/stop• " button. The •start/stop" indicator light illuminates.

iThe program starts with an

acoustic signal (if set).

If a standard program has been selected, the indicator lights indicate the progress of the program sequence.

i	At program end		an acoustic
	signal	is emitted	(if set) and the
	LED	•antiCrease"	illuminates.

iWhen the drying process is complete (program or selected time program ended), the drum rotates at specific intervals for 1￿hour.

This prevents the laundry from creasing. The laundry remains loose and fluffy until it is removed.

The laundry should be removed before this time has elapsed.

i

The estimated remaining time will be indicated.

i

If the door has not been closed properly, the dryer will not start.

i

Lint filter indicator flashes for

5￿seconds - •Check lint filter"!

20