Using Pause Dialing
Once stored, simply recall the entry and place the call. All of the digits you’ve stored will be recalled, but your phone will only send the tones for the set of numbers before the first pause.
1. | Place | Enter the |
| Call | stored your Pause Dialing number and press & |
|
| hold a or press ¾. Your phone will dial the |
|
| access number and wait for your input when it |
|
| reaches the first pause. |
2. | Send | When the automated system prompts you for |
| More | information, press a or ¾ to send the next |
| Numbers | group of numbers. Repeat this step to send |
|
| each group of numbers that you have stored. |
3. | End | Press ¼, close the phone, or press & hold a |
| Call | until you hear a high tone and press a again. |
Using Memory Linking
Each memory location holds up to 32 digits, including pauses. Some automated systems, however, may require you to enter more than 32 digits. In these cases, using Pause Dialing is still easy enough. Just split the numbers into two memory locations and recall the second set of digits as you need them.
1.Recall 2nd Once you have sent the tones from the Location 1st location, press ä and the
memory location where you stored the second set of digits.
2.Send Press ä and ¾ to send the tones in the
Tones 2nd location. If you have stored a pause in the 2nd location, your phone will pause as usual when it reaches it.
Using Memory
45
