20 mm

20 mm

To store pres- sure hose 3 or supply cable 6, pull the hose or cable briefly (the hose or cable rolls up auto- matically).

English 11

Give the detergent time to work, but never leave it to dry.

Rinse from top and work downwards.

Flexi-jet-lance (depending on model) (see figures B and E)

Turn the 4 jet-lance 7 90° anti-clockwise. Ex- tract the 4 jet-lance.

Insert the flexi-jet-lance into the power gun 8. Depress and turn the flexi-jet-lance 90° clock- wise to lock in place.

Note: Always pull out the pressure hose and supply cable completely when using the pres- sure washer.

Adjusting 4 Jet-lance (see figure F)

The 4 jet-lance has 4 different modes, which can be selected by rotating the nozzle.

Low pressure fan jet – for application of detergents.

High pressure fan jet – for cleaning sensitive surfaces like cars, garden fur- niture etc.

Roto jet – for powerful cleaning of larger areas like patios, driveways, etc.

Never use the roto jet mode to clean motor vehicles.

Pencil jet – for cleaning with maxi- mum power in smaller areas e. g. bar- becues, chewing gum on patio etc. Suitable for extremely dirty surfaces.

Operating with Detergents

fOnly use Bosch approved detergents. Un- suitable detergents may damage the unit and the object being cleaned.

Fill the detergent tank 2 with diluted detergent, as recommended.

To spray detergent rotate the nozzle of the 4 Jet-lance to low pressure fan jet mode.

Read the detergent label for additional instruc- tions.

Always wet the object first.

Apply detergent to the object from the bottom up.

Operation

Starting and Stopping (see figure G)

Before starting en- sure product is in horizontal posi- tion.

Starting

Connect the product to the mains supply ensur- ing that the mains switch is in the off position.

Attach water supply hose (not supplied) to the mains water supply and machine.

Open water tap.

Press the safety lock 10 to release the trigger 9. Fully press the trigger 9 until there is a constant flow of water to clear the air from the machine and water supply hose. Release trigger 9. Press the trigger safety lock 10.

Press on/off switch 4.

Point the power gun 8 downwards. Press the trigger safety lock 10 to release the trigger 9. Fully press the trigger 9.

Bosch Power Tools

F 016 L70 545 (14.1.11)

Page 11
Image 11
Bosch Power Tools 125 manual Operation, Adjusting 4 Jet-lance see figure F, Starting and Stopping see figure G