Bosch Appliances 125 manual Safety Notes, Power supply, Water connection, Application

6 English

Safety Notes

Before start-up please read these in- structions!

Before using the machine please read the operating instructions for your unit and comply in particular with these safety instructions. Please keep the instructions safe for later use.

The warning and information signs attached to the unit provide important information for safe operation.

Apart from the information in the operating in- structions comply with the general safety reg- ulations and regulations for the prevention of accidents.

Never direct the water jet at peo- ple, animals, the unit or electric components.

Power supply

fThe voltage indicated on the rating plate must correspond to the voltage of the power source.

fWe recommend that this equipment is only connected into a socket which is protected by a circuit-breaker that would be actuated by a 30 mA residual current.

fIf the supply cord is damaged, it must be re- placed by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

fNever touch the mains plug with wet hands.

fDo not pull plug while operating the device.

fDo not run over, crush or pull the power sup- ply cable or extension lead, otherwise it may be damaged. Protect the cable from heat, oil and sharp edges.

fDo not use the appliance, if the power supply cable or important parts, e. g. high-pressure hose, trigger gun or safety devices are dam- aged.

fWarning: Inadequate extension cords can be dangerous.

fIf an extension cord is used, the plug and socket must be of watertight construction. The extension cord must have a cross section in accordance with the operating instruc- tions and be protected against splashed wa- ter. The connection must not be in water.

fWhen replacing plugs on the power supply cable or extension lead the spray water guard and mechanical stability must remain intact.

Water connection

fComply with the regulations of your water supply company.

fAll connecting hoses must have properly sealed joints.

fThe appliance should never be used on the drinking water supply without a back flow valve. Water which has passed the back flow valve is regarded as undrinkable.

fThe high-pressure hose must not be dam- aged (danger of bursting). A damaged high- pressure hose must be replaced immediate- ly. Only use hoses and connections recom- mended by the manufacturer.

fHigh-pressure hoses, fittings and couplings are important for the safety of the appliance. Use only hoses, fittings and couplings recom- mended by the manufacturer.

Application

fBefore use, check that the unit and operating equipment are in perfect condition and are safe to operate. Do not use the unit if it is not in perfect condition.

fDo not direct the jet against yourself or oth- ers in order to clean clothes or footwear.

fNever draw in solvent-containing liquids, un- diluted acids, acetone or solvents! This in- cludes petrol, paint thinners, heating oil. The sprayed vapour is highly flammable, explo- sive and toxic.

F 016 L70 545 (14.1.11) Bosch Power Tools