BM 2609932519
CHARGING BATTERY PACK (1 HOUR CHARGER)
INDICATORS, SYMBOLS AND MEANING If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet.
If the green indicator light is “ON”,
the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged and is being
trickle charged, or the battery pack is too hot or cold for
switch to trickle charge, until a suitable temperature is reached, at which time the charger will switch automatically to fast- charging.
If the green indicator light is “BLINKING”, the battery pack is being
will automatically stop when the battery pack is fully charged.
Plug charger cord into your standard power outlet. Before inserting battery pack, remove protective cap, then insert battery pack into charger (Fig. 12).
The charger’s green indicator will begin to “BLINK”. This indicates that the battery is receiving a fast charge.
When the indicator light stops “BLINKING” (and becomes a steady green light) fast charging is complete.
When you begin the charging process of the battery pack, a steady green light could also mean the battery pack is too hot or too cold.
The purpose of the light is to indicate that the battery pack is
When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) and slip the battery pack back into the tool handle.
!WARNING To prevent fire or injury when batteries are not in
tool or charger, always place protective cap onto end of battery pack. Protective cap,
guards against terminal shorting.
FIG. 12
BATTERY
PACK
CHARGER | BATTERY PACK |
| |
| RELEASE TABS |
| PROTECTIVE |
| CAP |
